The BORA PURSU2 is a second-generation S Pure in high-gloss glass ceramic: a 580 mm induction hob with a central extractor that cleans the air and returns it to the room. With no ducting to plan it works where an outside wall is out of reach, from an island to a flat.

Cooking

The zones are split by type. Two round induction zones on the left, Ø 95 mm at 400 W and Ø 140 mm at 900 W, suit small pans and an espresso pot for the coffee function. On the right, two 230 x 230 mm surface induction zones deliver 2100 W each, or 3000 W on the power setting, and the bridging function joins them for a big pan. BORA Assist brings a Fry function, and pan size recognition, automatic heat-up and heat retention are all built in.

Controls and everyday use

You run everything from the tricolour sControl+ slider on levels 1–9 plus P. Connect the hob to BORA's app for a wider range of functions; BORA guarantees software updates for 5 years after the model is discontinued.

• GFESP odour filter supplied: activated charcoal with ion exchanger, good for up to 150 hrs (1 year)
• Filter status and filter service display
• eSwap filter change from above through the air inlet
• Stainless steel grease filter and integrated grease drip tray
• Child lock, cleaning lock and overheating protection

Size and installation

The hob measures 580 x 515 x 199 mm and weighs 20.2 kg with accessories and packaging. It goes in a base unit at least 60 cm wide, flush or on the worktop. An air purification box with a telescopic extension of up to 80 mm connects to the back of the cabinet. It can't be installed above an oven. Maximum load is 7360 W on 3 x 16 A, 2 x 16 A or 1 x 32 A, the mains cable is provided on site, and it's sealed in with heat-resistant silicone.